Bubble Solution Recipes

For a simple, basic recipe for a good bubble solution you will need:
1 oz. (30ml) detergent (Dawn – USA / Fairy – UK / Dreft – Europe) mixed with 16 oz. (480ml) water.

For a superior bubble solution, follow the instructions in this video for Mike’s Gooey Mix

Mike recommends mixing this up as a concentrate and mixing on site with distilled water. Mike Miller has a lot of great video of his bubbles at his Bubble Project site: www.kermitbubbleboy.net

This concentrate is diluted 8-to-1 (water-to-concentrate) which yields a 17:1 water:detergent ratio.


Ingredients (for concentrate to be mixed with two gallons of water):
2 cups warm/hot tap water
2 cups Dawn Pro (Dawn Manual Pot & Pan) or Fairy, Dreft, or other detergent (the best are made by P&G)
7 grams baking powder (not baking soda)
4 grams J-Lube powder 


Pre-measure your powders.

Into a 4-cup (1 liter) or larger container (Mike uses a 4-cup measuring cup):
Pour in 2 cups  (473ml) of warm/hot tap water
Add the 2 cups of Dawn Pro
Add 7 grams of baking powder

VERY QUICKLY add 4 grams J-Lube powder and immediately stir briskly with a large fork creating a convection-shaped motion within the mix while trying not to froth/foam the surface. Continue beating until there are very few clumps left. This will take a minute or two with a healthy wrist.

Making one gallon of concentrate. When Mike mixes this up, he pours the concentrate into a gallon jug and repeats the steps 3 more times to create one gallon of concentrate.


Diluting the Concentrate
To make the bubble juice, add two cups  (473ml) of concentrate to one gallon (3.785 liter) of distilled water. (most tap water will work too).

A lot more recipes and useful info can be found at Soap Bubble Wiki

Want to know more...